#ARDUINO MEGA 2560 NEOPIXEL PINS FULL#

We have example code for using with the Arduino Uno/Mega microcontroller at 8MHz and 16MHz, but it will not work with the Raspberry Pi, Basic Stamp, NETduino, any other interpreted/virtual machine microprocessor or any processor slower than 8 MHz. The protocol used is very very timing-specific and can only be controlled by microcontrollers with highly repeatable 100nS timing precision. To make the strip thin and easier to manufacture, the controller chip is inside the LED, which is kind of cool, but also means that the chip only uses a single pin for input and a single pin for output.A good power supply such as our 5V 2A or 10A supply is key!

#ARDUINO MEGA 2560 NEOPIXEL PINS FULL#

The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current. These LED's use about 9.5 Watts max (~2 Amps 5V) per meter.This is the strip with white flex PCB, its identical to the black 30 LED/meter except it has a different color mask on the flex strip These NeoPixel strips have 30 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm wide, 10 mm if you remove the strip from the casing. Adafruit NeoPixel Digital RGB LED Weatherproof Strip 30 LED -1m - White

Arduino mega 2560 neopixel pins